ROWE's stock reels range in capacity from 4,000 lb. to 50,000
lb. and up. We offer two distinct styles of mandrel expansion
for our reels; our standard hydraulic expansion and our original
mechanical screw-type expansion. Our reels offer years of dependable
service in the toughest of environments.
Rowe has three distinct designs of expansion,
based on coil capacity, to meet your coil handling needs: the
(3) Arm Link Pin Series, the Slipper Link Series, and the Heavy
Duty Sliding Wedge Series.
Our stock reels have the following drive
configurations, based on customer preference and application requirements.
-P
Plain reels are arranged for pull-off operation
by having the mandrel equipped with a pneumatic drag brake
with line regulator adjustment to provide a constant back tension
during the pull-off operation. (Note: An electric drag brake
can be supplied in place of the pneumatic brake if desired)
-DSJ
The driven spindle jog drive reel is arranged for
pull-off operation with the mandrel driven by a hydraulic
motor for threading material from the mandrel to the next
machine in line. The mandrel is equipped with an adjustable
air brake for different weight coils.
-DSV
The driven spindle variable speed reel is arranged for
slack loop payoff operation with the mandrel driven by a AC
Motor coupled through a AC variable frequency drive and
controlled with standard ultrasonic loop control. Jogging
controls for threading are also provided. For very heavy coils,
an ultrasonic brake control can be used to monitor the
size of the coil and adjust the brake accordingly to ensure
proper brake pressure at all times.
-DSL
Driven spindle loop control reels are arranged for slack
payoff operation with mandrels driven at a constant speed by
an AC motor coupled through an air clutch. Material
payoff is controlled by the use of an actuator (dancer) arm
for on/off control of the mandrel drive during payoff.
-
Single and Double End Configurations
-
Coil Weight Capacities from 4,000 to 50,000
lb.
-
Standard Coil Diameter Capacitiy of 60"
- Coil Width Capacities from 18" to 72" (model dependent)
- Mandrels in Link Pin, Slipper Link, or Heavy Duty Sliding Wedge
Designs
- Coil Locating Scale in (1) Arm
- Set of Coil Keepers Standard w/ Each Mandrel
- Full Radius Mandrel Design (standard on all but link-pin styles)
- Pneumatic Brake w/ Regulator (for -P, -DSJ)
- Powered Thread-up (Jog) Drive (for -DSJ Style)
- AC Open Loop Vector Drive w/ Ultrasonic Loop Control (for -DSV
Style)
- Motorized Control w/ Air Clutch Engagement & Loop Arm Control
(for -DSL Style)
Available Options:
- Full Radius Mandrel Caps (on link pin style)
- Up to 72" O.D. Coil Capacity Coil Clamping Arm w/ Choice
of....
- Non-Powered Roller (light duty.4" minimum stock width)
- Powered Hold Down Wheel (6 in. minimum stock width)
- Powered Hold Down Rollers (24 in. minimum, for heavier duty
applications)
- Narrow Powered Wheel (3 ½ in. minimum, for thinner, narrower
applications)
- (4) arm mandrel design
- Secondary Floor Mounted Arms for Heavier Gauge Materials Ultrasonic
Brake Tension Control
Coil Clamping Arms:
Provides
added safety during the thread-up process. The coil clamping
arm prevents clockspringing of the coil during both unbanding
and coil thread-up.
A secondary
arm is suggested in high yield or high gauge material applications
for additional coil support and operator safety. The secondary
arm is similar to the reel-mounted arm, but is positioned behind
the reel to support the back of the coil.
Stock Reel Specifications |
Series |
Range Coil Widths |
Max. Coil Weight Cap. |
Max. Coil O.D. |
Mandrel I.D. Range |
No. of Arms |
Expansion Type |
4000 |
18" & 24" |
4,000 lb. |
60" |
13" to 17" |
3 |
Manual Hand Crank Expansion |
6000 |
18", 24", & 30" |
6,000 lb. |
60" |
13" to 17" |
3 |
8000 |
18", 24", 30", & 36" |
8,000 lb. |
60" |
13" to 17" |
3 |
10000 |
24", 30", 36" & 48" |
10,000 lb. |
60" |
17" to 21" |
3 |
15000-H |
24", 36", 48", & 60" |
15,000 lb. |
60" |
19" to 24.5" |
3 |
Hydraulic Powered Expansion |
20000-H |
24", 36", 48", 60", & 72" |
20,000 lb. |
60" |
19" to 24.5" |
3 |
30000-H |
24", 36", 48", 60", & 72" |
30,000 lb. |
60" |
19" to 24.5" |
3 |
40000-H |
48", 60", & 72" |
40,000 lb. |
60" |
19" to 24.5" |
3 |
50000-H |
60" & 72" |
50,000 lb. |
60" |
19" to 24.5" |
3 |
7500-E |
20", 30", & 40" |
7,500 lb. |
60" |
15 3 / 4 " to 20 1 / 4 " |
4 |
Electric Screw-Type Expansion |
10000-E |
20", 30", 40", 50", 60" |
10,000 lb. |
60" |
15 3 / 4 " to 20 1 / 4 " |
4 |
12000-E |
30", 40", 50", 60", 72" |
12,000 lb. |
60" |
19" to 24.5" |
4 |
Electric Screw-Type Expansion |
16000-E |
30", 40", 50", 60", 72" |
16,000 lb. |
60" |
19" to 24.5" |
4 |
20000-E |
30", 40", 50", 60", 72" |
20,000 lb. |
60" |
19" to 24.5" |
4 |
30000-E |
40", 50", 60", 72" |
30,000 lb. |
60" |
19" to 24.5" |
4 |
40000-E |
50", 60", 72" |
40,000 lb. |
60" |
19" to 24.5" |
4 |
50000-E |
50", 60", 72" |
50,000 lb. |
60" |
19" to 24.5" |
4 |
|
